Oct 13 2009

Stitch Example: Slot Seam

Published by at 9:00 am under Sewing,Stitch Example

Continue reading to see how to do this.

Slot Seam - Part 1

Stitch along seam allowance with basting stitches. (Ignore the staple in this picture.)

Slot Seam - Part 2

Press open.

Slot Seam - Part 3

Center bias strip over seam. It should be a bit wider than the seam allowances. In this case 1.5" to a 5/8" seam allowance.

Slot Seam - Part 4

Pin bias strip down.

Slot Seam - Part 5

Stitch on front, using normal seam length, with edge of presser foot along seam. Do this on both sides.

Slot Seam - Part 6

Press.

Slot Seam - Part 7

Remove the basting stitches. Press again if desired.

No responses yet

Trackback URI | Comments RSS

Leave a Reply